What are the quality requirements for solid waste steel slag brick making machine molds?

Solid waste steel slag brick making machine molds are the basis for product molding and an important part of the new brick machine production line, so the choice of brick machine mold materials will affect the output of the entire brick production line and the quality of block products. In the production process of the new brick machine, the hydraulic brick machine mold needs to be subjected to the pressure of the hydraulic station, the friction between the material particles, etc., so what are the quality requirements for steel slag brick making machine molds?

First of all, the raw materials of large brick machine molds should have strong toughness, wear resistance, strong fatigue fracture performance, corrosion resistance, high temperature resistance, and strong cold and hot fatigue performance. Therefore, brick machine molds must not only meet the requirements of production technology, but also meet the requirements of economic practicality.

The working conditions of solid waste steel slag brick making machine molds are mostly very bad. If the material selection is not good, it may easily lead to brittle fracture when subjected to a large load for a long time. In order to prevent the sudden breakage of the mold parts of the unburned brick machine during production, the mechanical mold must have high strength and toughness. Carbon content and grain size are the standards for considering the strength and toughness of materials. When the working temperature of the block mold is high, the hardness and strength will decrease, resulting in early wear of the mold or plastic deformation and failure. Therefore, the mold material of the Quangong brick machine has high high temperature resistance to ensure that the special-shaped brick mold has high hardness and strength at the working temperature.

In order to ensure the normal and safe operation of the Quangong large brick machine, on the premise of selecting high-quality materials for the block mold, maintenance work should also be done well. Before each production run, check that each part is installed normally and that there is no looseness in the parts. After production, clean up the materials in the wire cutting mold. Apply lubricating oil and paint to the steel slag brick making machine mold in time to reduce mold friction and corrosion.